返回: 無線類比中繼器(Analog RF Repeater)

JTD-RP-DWN-20-40

PDF列印
LTE1800+LTE2100+5GNR (TDD-3500) Pico RF Repeater (20dBm)
JTD-RP-DWN-20-40JTD-RP-DWN-20-40
on-order.gif
JTD-RP-DWN-20-40
JTD-RP-DWN-20-40 Specification
描述

線性功率放大,有效抑制互調和雜散發射。

Ø   採用高選擇性、低插入損耗的濾波器,消除了上下行之間的干擾。

Ø   穩定和改善的信號傳輸質量。

Ø   內置5G動態TDD同步檢測模組,自動完成5G無線網絡小區搜索和無線信令處理。

Ø   智能自動電平控制(ALC)確保輸出電平穩定且連續可調。

Ø   服務天線和施主天線之間的自動隔離檢查。

Ø   智能模式可根據供體站點接收到的隔離度和信號電平自動調整增益。

Ø   USB端口提供連接到本地監控的筆記本電腦或基於IPNMS(網絡管理系統),可以遠程監控中繼器的工作狀態並通過以太網將操作參數下載到中繼器。

 

Ø   Two signal ports with full duplex design.

Ø   Aluminum-alloy casing with IP65 protection has high resistance to dust, water and corrosion.

Ø   Linear power amplification to effectively suppress inter-modulation and spurious emission.

Ø   Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink.

Ø   Stable and improved signal transmission quality.

Ø   Built-in 5G Dynamic TDD Sync Detection Module, automatic completion of 5G wireless network cell search and wireless signaling processing.

Ø   Smart Automatic Level Control (ALC) ensures output level stable and adjustable continuously.

Ø   Auto Isolation check between service and donor antennas.

Ø   Smart mode to auto-adjust gain according to the isolation and signal level received by donor site.

Ø   USB port provides a link to a notebook for local supervision or IP Based NMS(Network Management System) that can remotely supervise repeater’s working status and download operational parameters to the repeater Via Ethernet.